When charging lithium-ion batteries, most of them use the CC-CV charging system. So why is constant voltage charging added after constant current charging?

Jingtong Battery Equipments presented the largest Canton Fair in history with its automated whole plant solution.

Jingtong Battery Equipments is a major global supplier of Lithium Battery Materials and Equipment. Both standard and customized products are available from Jingtong Industry.

On 10th-12th March 2023, Jingtong Battery Equipments Limited attends the 5th academic conference of Chinese new energy materials and devices in Changsha city, Hunan province.

Today, one set of electrode roller press machines was completed and arranged to ship to our New Zealand customer.

The research and development of any kind of lithium battery is a long process, determining the requirements, product design, establishing the lab line,

Welding strips on the batteries to build the battery pack is a common technique for both DIY machinists and professional manufacturers.

The activation stage of the lithium battery pack includes the stages of pre-charging, formation, aging, and constant capacity.

The current collector is one of the indispensable components in lithium-ion batteries. It can not only carry the active material but also collect and output the current generated by the electrode active material.

Coin cell battery equipment and battery materials are shipped to New Zealand, Coin battery equipment includes electric crimping machine and coating machine.

The Battery separator refers to a layer of separator material between the positive and negative electrodes of the battery. Today we will study the development trend of lithium-ion battery separators from the research direction of the diaphragm and the improvement of diaphragm performance.

This batch of lithium-ion battery materials mainly includes battery-grade copper foil, battery-grade aluminum foil and other active materials.

This morning, the lithium battery current collector materials are packaged and shipped to the Korean customers, including Aluminum foil, Copper foil, Nickel foam, Carbon cloth, Carbon coated aluminum foil, etc.

These are electrode sitting machine, electrode coating machine,3 layers oven, auto battery Electrode winding machine, Al and Cu foil, and kinds of battery raw materials.

When you use a mobile phone, are you worried that it doesn't work? What do you do when you drive an electric car and no power in it?

The 12 tons of LFP powder ordered by our customer have been completed and will be shipped to the customer soon.

Today we completed the delivery of a batch of equipment. including coin cell punching machine with different diameters of punch dies

The battery coating machine desktop continuous coating machine is a small roll-to-rolling coating machine for lab research, it is assembled by high precision coating device.

In October 2021, Jingtong Industry sold out a whole line of 18650 battery pack assembly machines to an energy company in Denmark, and arrange shipped on 1st, Nov, 2021.

Jingtong Industry always pays attention to product quality, and we always insist that each battery equipment is fully tested before delivery, to ensure that each piece of equipment is qualified and has excellent performance products.

A new type of anode material with fast charging, high safety and high energy density, new hope for lithium battery!

The breakthrough of full-tab technology and the parallel ternary/iron-lithium technology have made the advantages of the large cylinder in terms of performance, cost and safety more obvious.

In June 2021, we received a consultation email from a battery equipment company in USA. on how to make coin cell batteries, cylindrical batteries, and punch cell batteries.

Today we finished the shipment of the full set of 18650 Cylinder battery Lab research needed equipment ordered by one of our customers.

The battery cell formation and grading machine is the ideal equipment for battery factories to sort different grade battery cells before they sell to clients.

Facing the rapid expansion demand for power lithium batteries, it is the core link of the front-end process of lithium battery production.

As the current collector of lithium battery cathode materials aluminum foil has a low-cost ratio in lithium batteries but is indispensable.

Each of our Jingtong Industry staff is committed to making the best battery equipment (Lab scale line) to help you achieve project success.

In the future, full tab large cylindrical batteries for high-end models will become the core product of BAK's automotive electronics applications.

Lithium battery materials mainly include cathode material, anode material, battery separator, and battery electrolyte.

Our 304 stainless steel 18650 battery case with cap and insulation gasket is mainly used for battery lab, you will still need cylindrical battery grooving machine to groove the case before the sealing process.

Will monomer-specific energy exceeding 180Wh/kg become a new watershed in power battery product technology?

As the main source of electricity in new energy vehicles, batteries provide power support for various systems, and their quality directly affects the normal driving of the vehicle.

The vacuum film coating machine used for laboratory lithium battery electrode coating, battery coating machine with automatic heating and drying function

Electrolytic copper foil is an important material for the manufacture of copper clad laminates (CCL), printed circuit boards (PCB), and lithium-ion batteries.

The India customer ordered several types of equipment for the battery pack machine, including 512CH cell capacity grading machine, customized spot welding machine and BMS tester.

The function of the vacuum mixer is to mix the powdered raw materials with the liquid required by batteries after the ball milling.

The Battery cell formation and grading machine is the ideal equipment for battery factories to sort different grade battery cells before they sell to clients.

Jingtong Industry provides a full set of cylindrical battery-producing machines/equipment from mixing to the last testing process.

Jingtong Industry provides a full set of coin cell battery-producing machines/equipment from mixing to the last testing process.

The positive electrode material of lithium-ion batteries is usually composed of lithium active compounds, and the negative electrode is carbon with special molecular structure.

The reporter learned from exclusive channels that cobalt-free batteries include two chemical systems and corresponding routes, namely mass production of supporting lithium iron phosphate batteries

This 5V10mA coin cell tester is mainly used for lab button battery research with dual testing range: Range1: 5uA-1mA, Range2

8-channel high-precision battery test system designed to measure battery performance up to 5V in the range of 12mA to 12A.

Jingtong Industry is very grateful for our customers placing orders of battery pack equipment (7 channels aging machine,512 channels battery grading machine, 11 channels sorting and BMS tester, etc).

Recently, Tesla published a patent claiming that its battery life has been extended to 1.6 million kilometers, which has attracted the attention of a large number of people in the power battery industry.

From December 24th to 25th, the 2019 High Specific Energy Solid-State Battery Key Materials Technology Symposium was held at the Crown International Convention and Exhibition Hotel in Kunshan, Jiangsu.

Our Israel customer bought 1000pcs 18650 2200mah battery with 2C discharge rate from us to do the EV Battery pack firstly.

The machines include vacuum mixing machine, coating machine, hot rolling press machine, vacuum oven, electrode die cutter machine, battery slitting machine, pre-sealing machine.

Including coin cell disc cutter(battery separator and electrode punching machine), coin cell Crimper(electric type crimping machine for CRXX coin cell).

Lithium Battery Equipment Manufacturer

The production process of lithium battery equipment is closely related to its technological process. Normally, the lithium battery process is roughly divided into three stages: pole piece production, battery cell assembly, and battery assembly.

Jingtong Battery Equipments offers the most professional cylindrical cell assembly equipment for 18650/21700/26650 battery laboratory research and assembly.

Jingtong Battery Equipments offers the most professional pouch cell and supercapacitor assembly line equipment for battery research and manufacturing.

Jingtong Battery Equipments offers the full set of pouch cell battery producing equipment from mixing to last testing equipment, Including the ball mill, vacuum mixer, electrode coating machine, rolling press machine, electrode die cutter, battery stacking machine, ultrasonic spot welder, pouch forming machine, top&side heat sealer, electrolyte diffusion chamber and filler, secondary vacuum heat sealer, edge cutting machine, edge folding machine, edge hotting machine and battery tester.

Jingtong Battery Equipments provides a full set of cylindrical battery-producing machines/equipment from mixing to the last testing process.

Jingtong Battery Equipments provides a full set of cylindrical cell battery-producing equipment from mixing to last testing equipment, including the tub furnace, ball mill, vacuum mixer, electrode coating machine, electrode rolling press machine.

Jingtong Battery Equipments provides a full set of coin cell battery-producing machines/equipment from mixing to the last testing process.

Jingtong Battery Equipments provides metal and chemical materials that are used to make coin cells, if you want more details about the materials, please contact us without hesitation.

The finished battery pack comprehensive general testing machine is used to quickly and accurately test the performance of the finished battery pack. The main test items are open circuit voltage, AC internal resistance. etc.

​The desktop battery BMS Tester is for finished batteries is fast and accurate equipment for testing the performance of finished batteries.

This lithium battery pack BMS tester is mainly used to detect whether the functional indexes of the power battery protection board are within the parameter range, so as to provide a set of detection standards for staff.

The Battery heat sealing machine is a compact heating sealer for sealing aluminum-laminated films during pouch cell (polymer Li-Ion cell) case preparation.

Jingtong Industry can provide custom pouch cell case-forming services according to your requirement.We also provide customer services according to your requirements to design the new pouch die, but you need to pay for the die sinking cost.

Aluminum laminated film is one of the five major materials of lithium-ion batteries, and it is pouch lithium battery packaging material.

The PVC/POF Heat Shrinking Machine is very suitable for automatic unmanned packaging of products with an automatic packaging line, and suitable for single item packaging or packaging of items with bottom support.

32650 Cylindrical Battery Cases with Caps used for 32650 battery research, producing, especially for powerful 32650 battery making.

The 18650 21700 26650 32600 Battery Cases with Anti-Explosive Cap and Insulation O-ring, Used for 18650 21700 26650 32600 cylindrical cell battery research, producing

21700 Cylindrical Battery Cases with Caps used for 21700 battery research, producing, especially for Powerful 21700 battery making.

Coin cell lab equipment line mainly includes the vacuum mixer, manual film coating machine, electrode roller press machine, electrode cutter and crimping machine for coin cell sealing.

The heating electric vertical roller press machine is mainly suitable for the electric rolling of battery materials in the laboratory

This mixer equipment is a compact dual-shaft planetary vacuum mixer. Compared to single shaft models, the dual shaft mixer comes with three segments programmable mixing speed from 0 - 600 rpm, which provides more uniform slurry mixing.

This lab coin cell crimper can be used for most kinds of button battery automatic crimping. Standard configuration is used for assembling and disassembling CR20XX series coin cell cases.

The cylindrical battery grooving machine is suitable for uniform and automatic rolling grooves of cylindrical steel shells (or capacitor aluminum shells) equipped with batteries.

The MSK-111A-E is a high-accuracy automatic stacking machine with many advanced features to ensure stable, repeatable, and precise electrode stacking.

The 18650 electrode winding machine is specially used for the winding of aluminum foil packaging batteries/cylindrical batteries and supercapacitors.

This DC double-needle 18650 spot welding machine is specifically designed for professional Li-ion Battery Research. It is mainly used for Welding PCB for the mobile phone battery packs and EV battery packs for battery and Nickle tab weld.

This battery electrolyte diffusion chamber vacuum standing box is specifically designed for professional Li-ion Battery Research.

The lab pouch cell vacuum heat sealer is mainly suitable for vacuuming and hot-pressing pre-encapsulation of soft-packaged lithium batteries after liquid injection and standing.

This battery edge cutting machine is mainly used for lithium polymer battery aluminum laminated film trimming molding, and it can also be used for cutting off other soft materials.

Jingtong is a professional supplier of lithium-ion battery cathode raw material NMC 111 424 532 622 811 powder for manufacturers of lithium-ion battery lab research.

Jingtong is a professional supplier of lithium-ion battery cathode raw material NMC 111 424 532 622 811 powder for manufacturers of lithium-ion battery lab research.

Jingtong is a professional supplier of MnO2 powder for manufacturers of lithium-ion battery lab research.

Jingtong is a professional supplier of battery-grade CO3O4 Cobaltosic Oxide Powder for manufacturers of lithium-ion battery lab research.

Jingtong is a professional supplier of battery-grade MnC2O4 powder for manufacturers of lithium-ion battery lab research.

Our Lithium Carbonate Li2CO3 Powder material features several grades of Li2CO3, optimized for use by Cathode and Electrolyte precursor materials manufacturers.

High pure Irregular hard carbon powder materials for Sodium ion(Na-ion) and Lithium ion(Li-ion) battery anode materials.

Aluminum Laminated Film for Polymer Battery Case Thickness 122um

Aluminum Laminated Film for Pouch Cell Case is used as casing material for polymer Li-Ion batteries.

152um Aluminum Laminated Film for Power Polymer Lithium Ion Battery Pouch Cell Case

The battery pack aging machine is mainly used for lithium battery charging and discharging cycle tests. The test items include battery charging protection voltage, discharging protection voltage, capacity, etc.

This battery aging machine is mainly used for lithium battery charging and discharging cycle tests. The test items include battery charging protection voltage, discharging protection voltage, capacity, etc.

This battery pack aging cabinet is mainly used for lithium battery charging and discharging cycle tests. The test items include battery charging protection voltage, discharging protection voltage, capacity, etc.

The supercapacitor final sealing machine is suitable for the battery and supercapacitor shell to be used for the secondary mold sealing and crimping forming.

The JT-ACS-50 pneumatic cylindrical battery sealing machine is used for various sizes of cylinder cells and supercapacitor sealing processes.

The JT-HSM650 cylindrical cell sealing machine is a compact hydraulic crimping machine for sealing all types of cylinder cases in battery R&D labs.

This digital electrolyte filler is the new generation bottle top burette & dispenser. It has a number of innovative features and upgrades for performing more accurate and convenient titrations.

The JT-EIP-10 electrolyte filling pump system includes an electronic control box, a stepper motor, and A high-precision rotating fluid reciprocating pump made of special ceramic.

The lithium battery roll electrode slitting machine is a semi-automatic slitting machine for preparing electrodes of cylinder batteries and prismatic batteries in R&D laboratories and production lines.

This desk-top spot welding machine is mainly used for 18650 battery pack tab welding, it is suitable for nickel strip/foil thickness from 0.05-0.25mm.

This pneumatic 18650 cell spot welder is mainly used for cylindrical battery nickel tab welding, suitable for 0.02-0.2mm welding thickness.

The vacuum electrode film coating machine is equipped with a precise adjustable film device, and the moving push rod pushes it to move at a constant speed to achieve the uniformity of the slurry coating on the substrate.

The lab roll-to-roll electrode film coating machine is a compact Roll to Roll continuous coater, designed for the continuous coating process of the positive and negative electrodes of lithium-ion batteries.

This battery edge cutting machine is mainly used for lithium polymer battery aluminum laminated film trimming molding, and it can also be used for cutting off other soft materials.

The hard carbon material is considered to be the most likely anode material for sodium ion batteries due to its advantages of abundant resources.

10 Micron Lithium Ion Battery Copper Foil/Cu Foil For Anode Substrate

High Purity Cu Foil Lithium Ion Batteries Copper Foil 9um-200mm

This Lithium-ion Cu Foil Copper Foil is used as a substrate for coating anode materials in Li-Ion battery research.

This Electrolytic Copper Foil is used as a substrate for coating anode materials in Li-Ion battery research.

Lithium Ion Battery Aluminum Foil 16um for Battery Anode Current Collector

Battery Grade Aluminum Lithium Battery Foil 14um For Lithium Ion Battery Cathode Current Collector

99.9% purity aluminum foil roll can be used for battery cathode raw material.

Jingtong Industry supplies customizable planetary ball mills and planetary milling grinder equipment for Lithium-ion battery research.

This 50L High-Temperature Vacuum Drying Oven is suitable for the drying, sterilization and heat treatment of articles in the laboratories of industrial and mining enterprises

This manual rolling press machine is mainly suitable for the manual rolling of battery materials in the laboratory.

The hydraulic balance electric pair horizontal rolling press machine is aimed at high-precision rolling of positive and negative plates in the battery industry.

The manual Horizontal Roller Press Machine is mainly suitable for the manual rolling of battery materials in the laboratory.

This Electric lab roll press machine can be adjusting the thickness of the Li-Ion batteries electrode after coating and drying.

Coin Cell Crimping Machine is applied to the production of samples for the research and development of battery materials in the laboratory.

High-quality electrolytic Li-ion copper foil is used as the current collector for the anode of Lithium-Ion Batteries.

High Precision Lithium Ion Battery Copper Foil/Cu Foil 12um Width 150mm

The electric coin cell crimping machine is a compact pressure adjustable electric crimper for CR20XX coin cells, such as CR2016, CR2025, CR2032.

The Swagelok-type cells are specially designed to facilitate lithium-ion battery research. The Swagelok-type cells are made of 5 parts. Small size, Simple operation.

The coin cell battery tester is an 8-channel battery analyzing equipment for lab research, suitable for all kinds of coin cell batteries such as lithium battery, NI-MH battery, Zn-Mn watch battery and so on.

5V20mA Coin Cell Battery Tester is a precision battery tester for small coin cells lab analyzing.

This 5V10mA Battery Tester is an eight-channel battery analyzer to analyze small coin cells from 0.001 mA to 10 mA, up to 5V.

This Electrolyte Filling Machine is the new generation bottle top burette & dispenser. It has a number of innovative features and upgrades for performing more accurate and convenient titrations.

Three electrode split test cell is designed for R&D of rechargeable Li-ion battery materials.

This Stainless Steel Two Electrode Split Test Cell is designed for R&D of rechargeable battery material.

100mm Micrometer Film Applicator - This unique wet film applicator features micrometer heads for knife blade adjustment.

Adjustable Film Applicator - This unique wet film applicator features micrometer heads for knife blade adjustment.

This Electrolyte Battery Filling Machine is the new generation bottle top burette & dispenser. It has a number of innovative features and upgrades for performing more accurate and convenient titrations.

This Lithium-ion battery copper foil is used as a substrate for coating anode materials in Li-Ion battery research.

This 20-200µl digital electronic single-channel pipette filler is an ergonomic, intuitive electronic pipette made in Germany used for dispensing electrolytes

5V10mA Button Battery Tester is an eight-channel battery analyzer for small coin cells with a range of current 0-10mah, voltage 0-5v.

JT-BT-5V5mA coin cell battery tester is an eight-channel battery analyzer to analyze small coin cells with a range current of 0.025-5mah, voltage 0-5v.

The pneumatic coin cell crimping machine is applied to the production of samples for the research and development of battery materials in the laboratory for button batteries

304ss/316ss CR2016 CR2025 CR2032 coin cell cases with o-rings for lithium battery laboratory research in universities and research institutes.

This 8 channels button cell testing clip is suitable for holding button cells with diameter up to 25mm. Build-in Polarity Check function, easy battery insertion and removal.

This JT-MSK-FT01 slurry filtration system is designed for use with the preparation of battery electrode slurries. It comes with two filters for removing particle sizes with dia.

This lab vacuum film coater machine is widely used for the research of all kinds of film coating,like ceramic films, crystal films, battery material films, and special nano-films.

The EQ-STC-LI-AIR is Split Test Cell for Lithium-Air Battery Research. You can control airflow pressure and test various anode and cathode materials at easy

The JT-EQ-STC-BEW split-able test cell features a 35 mm Dia. Beryllium (Be) Window which allows in-situ XRD analysis of battery material phase transitions during the charging/discharging cycles.

This lab rolling press machine is an ideal calender for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying.

This roller press machine is a compact hot rolling press machine that mainly serves for pressing samples in the lab or other applications in batteries-made material research

This small vacuum mixing machine is built-in the vacuum pump, with high dispersion efficient equipment. It is suitable for battery electrode paste and various ceramic materials mixing.

This vacuum mixer mixing machine is built-in the vacuum pump, with high dispersion efficient equipment. It is suitable for battery electrode paste and various ceramic materials mixing.

This Single workstation laboratory vacuum glove box is integrated with a single column purification unit, PLC touch screen operation control, vacuum pump, bracket, a closed box, with operating surface tilt and safety glass front window.

Lab vacuum glove Box with air circulation and vacuum system, gas purification system to control water and oxygen index less than 1ppm.

The pneumatic coin cell battery crimper is applied to the production of samples for the research and development of battery materials in the laboratory

JT-BT-5V5mA coin cell battery tester is an eight-channel battery analyzer to analyze small coin cells with a range current of 0.025-5mah, voltage 0-5v.

The 5V50mA 8 Channel Coin Cell Tester Analyzer is an eight-channel battery analyzer to analyze small coin cells with a range current 0-50mah, voltage 0-5v.

Battery Holder CR2032 Battery Retainer for CR2032 Coin Cell

316 Stainless Steel Coin Cell Wave Spring(Belleville Washers) for CR2032 Battery

0.5 Mm Thickness 304SS Stainless Steel Coin Cell Spacer Button Battery Spacer

Jingtong Industry provides CR1016 coin cell case 304SS and CR1016 coin cell crimper for lithium-ion battery research.

The coin cell crimping machine is mainly used for battery materials sample production in the laboratory, it is for coin cell battery and capacitor research and stainless steel case crimping.

This coin cell crimper is a newly designed manual coin cell crimping machine with a lighter weight. It is both a coin cell assembly machine and a coin cell disassembling tool.

This hydraulic battery crimper has a new design and CE Certified manual coin cell crimper with lighter weight and a smaller footprint.

Meshed CR2032 coin cell case, made of stainless steel (304SS), excellent for developing Zinc/Lithium-Air battery.

This coin cell disc cutter is a compact disc cutter with quality sliding rail for battery separator precision cutting. It can be easily placed into a glove box via a transition chamber which a diameter larger than 230mm.

This battery vacuum slurry filter is mainly applied to a special filter designed for laboratory samples to filter out various hard particles with a particle size of not less than 124 microns in the slurry.

This Single workstation laboratory vacuum glove box is integrated with a single column purification unit, PLC touch screen operation control, vacuum pump, bracket, a closed box, with operating surface tilt and safety glass front window.

The lithium chips are used in the lithium-ion battery, reactor carrier and organic synthetic vitamins, synthetic rubber, medicine, pharmacy, lial-ce alloy materials etc.

The JT-HSM650 cylindrical cell sealing machine is a compact hydraulic crimping machine for sealing all types of cylinder cases in battery R&D labs.

The JT-MSK-530 cylinder cell disassemble is a compact manually-operated machine for disassembling cylinder cases in the battery R&D lab.

This Lab Manual Crimper is a compact hydraulic crimping machine for sealing all types of cylinder cases for battery R&D research.

This cylindrical cell battery tester has multi-channel for choice, like 512 channels and 256 channels, 5V3A, 5V6A and 5V10A are available.

Each device can carry out constant current and constant voltage charging and constant current discharge test on 512 batteries meeting the voltage range.

The 5V6A lithium battery tester equipment is an eight-channel battery analyzer to analyze polymer battery and cylindrical batteries from 0.1 mA to 6000 mA, up to 5V.

JT-BST8-WA is an 8 channel battery tester analyzer to analyze small coin cells and cylindrical batteries from 6.0 mA to 3000 mA, up to 5V, with gold-plated pins for the best connection.

JT-BST8-3 is an 8 channel battery analyzer to analyze small coin cells and cylindrical batteries from 6.0 mA to 3000 mA, up to 5V, with gold-plated pins for the best connection.

This digital bottletop Dispenser is perfect for dispensing LiPF6 series of electrolytes from 1 - 10 ml for battery research.

This MSK-150-L is a desktop electrolyte filling machine with speed control console and injection pump for high-precision dispensing purposes.

The JT-EIP-10 electrolyte filling pump system includes an electronic control box, a stepper motor, and A high-precision rotating fluid reciprocating pump made of special ceramic.

The JT-VGB-3 Lab vacuum glove box is a kind of equipment with an anhydrous and anaerobic environment for lithium battery research.

The cylindrical cell grooving machine is suitable for uniform and automatic rolling grooves of cylindrical steel shells (or capacitor aluminum shells) equipped with batteries.

The JT-ACS-50 pneumatic cylindrical battery sealing machine is used for various sizes of cylinder cells and supercapacitor sealing processes.

The hydraulic battery sealer cylindrical cell sealing machine is a compact hydraulic crimping machine for sealing all types of cylinder cases in battery R&D labs.

26650 Battery Case with Anti-Explosive Cap and Insulation O-ring, Used for 26650 cylindrical cell battery research, producing, especially for Powerful 26650 battery making

18650 Battery Case with Anti-Explosive Cap and Insulation O-ring, Used for 18650 cylindrical cell battery research, producing, especially for Powerful 18650 battery making

This pneumatic spot welding machine is mainly used for cylindrical battery nickel tab welding, suitable for 0.02-0.2mm welding thickness.

This ultrasonic spot welder is with semi-auto frequency tracking function, don't need to set the frequency always, simple operation.

This DC double-needle spot welding machine is specifically designed for professional Li-ion Battery Research. It is mainly used for Welding PCB for the mobile phone battery packs and EV battery packs for battery and Nickle tab weld.

This ultrasonic spot welding machine with a touch-screen controller and automatic frequency tracking function.

The 18650 cylindrical cell electrode winding machine is specially used for the winding of aluminum foil packaging batteries/cylindrical batteries and supercapacitors.

This ultrasonic welding machine with a touch-screen controller and automatic frequency tracking function.

The EQ-SPCW is splittable pouch cells with a double quartz window for X-Ray or Raman in-situ analysis. The split pouch cell is made of Nylon or Peek.

This high discharge rate LFP Cathode Material LiFePO4 Powder is the positive active material of the power battery.

This 18650 slitting machine is a CE Certified semi-automatic slitting machine (roll slitting) for preparing electrodes of cylinder batteries in R&D laboratories.

This ultrasonic spot welding machine is with semi-auto frequency tracking function, don’t need to set the frequency always, simple operation.

The lithium battery electrode slitting machine is a semi-automatic slitting machine for preparing electrodes of cylinder batteries and prismatic batteries in R&D laboratories and production lines.

The 300mm continuous battery electrode coating machine is a three-roll transfer coating machine, which can be used for continuous and intermittent coating, and is convenient to apply to various substrate surface coating processes.

This desk-top spot welding machine is mainly used for 18650 battery pack tab welding, itis suitable for nickel strip/foil thickness from 0.05-0.25mm. (pure nickel strip better thinner than 0.2mm).

This electric battery electrode calendering machine is mainly used for the electric rolling press of battery materials, a few precious metal materials like gold and silver, and nonferrous materials like copper and aluminum in the lab.

This is a CE Certified magnetic de-ironing filtration system. It is designed for optimizing the condition of slurry before the coating process.

This planetary vacuum mixer is high-efficiency equipment that integrates vacuum mixing and dispersion. It is suitable for the battery cathode and anode electrode slurry mixing process in the lithium battery experiment process.

This digital electrolyte filling machine is the new generation bottle top burette & dispenser. It has a number of innovative features and upgrades for performing more accurate and convenient titrations.

This cylinder battery slitting machine is a CE Certified semi-automatic slitting machine (roll slitting) for preparing electrodes of cylinder batteries in R&D laboratories.

This is a CE Certified magnetic de-ironing filtration system. It is designed for optimizing the condition of slurry before the coating process.

This Planetary Vacuum Mixer with 5-liter containers and complete accessories for immediate use. The Slurry vacuum mixer produces multi-movements during stirring, including, revolution and rotation.

High Consistency Lithium cobalt oxide LiCoO2 powder LCO is mainly used for lithium battery cathode raw material

This battery test system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.

This Eight-Channel Battery Tester is a three-range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS.

This is a semi-automatic slitting machine for cylindrical battery electrode preparation.The electric slitting machine can be applied to the precision slitting process of lithium-ion battery positive and negative plates.

The battery digital electrolyte injector provides accuracy and precision within the tolerances of Class A glass burettes. Suitable for most titrants in concentrations up to 1 mol/L.

This planetary vacuum mixer machine is mainly used in various lithium battery slurry and other types of solvent and powder mixing processes.

The Semi-automatic pouch cell die cutting machine is mainly used for pouch cell electrode sheet cut for stacking pouch cell battery.

This laminated forming machine is used for lithium polymer battery/ pouch cell cup forming for making pouch cell batteries.

This battery core formation machine is mainly suitable for hot flat pressing and shaping after winding the electric core.

The Semi-automatic electrode die cutter is mainly used for pouch cell electrode sheet cut for stacking pouch cell battery. It is a necessary tool in the production line of pouch cells to produce specific shapes of cathodes and anodes with current collector tabs.

The 18650 cell spot welding machine is suitable for battery pack assembly, such as the power-tool batteries, street light batteries, EV batteries, electric motorcycle batteries, etc.

Lithium Ion Battery Anode Materials And Cathode Material for Pouch Cell

This vacuum standing box battery electrolyte diffusion chamber vacuum standing box is specifically designed for professional li-ion battery research.

This semi-auto stacker is suitable for the lamination process of battery cells. The positive and negative electrodes and the separator are laminated in a Z shape.

This semi-auto stacking machine is suitable for the lamination process of battery cells. The positive and negative electrodes and the separator are laminated in a Z shape.

MSK-112A-EA Semi-Automatic Cylindrical Winder Machine is a device that can be applied to the winding process of cylindrical lithium-ion battery pole pieces.

The cylindrical battery shell remover is a compact manually-operated machine for disassembling cylinder cases in the battery R&D lab.

This electrolyte diffusion & degassing chamber is mainly used for absorbing the electrolyte and making it mix with electrode more completely under the condition of vacuum when injecting liquid into pouch cells and cylindrical batteries.

This electrolyte diffusion & degassing chamber is mainly used for absorbing the electrolyte and making it mix with electrode more completely under the condition of vacuum when injecting liquid into pouch cells and cylindrical batteries.

This pouch cell case forming machine is used for lithium polymer battery/ pouch cell cup forming for making pouch cell batteries.

This battery vacuum sealing machine is mainly used for vacuum hot sealing after electrolyte diffusion of pouch cell Li-ion batteries(medium, small size).

The Battery Winding Machine is a semi-automatic winding machine used for lithium Prismatic battery precision winding for the production line. and suitable for the different models of battery by changing the winding blade, The change work is a simple operation.

Lithium Ion Battery Raw Material Aluminum Laminated PE Film for Pouch Cell Case

This electrode battery stacking machine is suitable for the stacking process of pouch cells. Used for stacking battery cores that stack the anode/cathode and separator in a Z shape.

This electrode stacking machine is suitable for the stacking process of pouch cells. Used for stacking battery cores that stack the anode/cathode and separator in a Z shape. Stacking machine and control box integration, save space, easy to set parameters, easy to operate

The battery winding machine is a semi-automatic electrode winding machine used for lithium Prismatic battery precision winding for the production line. and suitable for the different models of battery by changing the winding blade, The change work is a simple operation.

The MSK-111A-E is a high-accuracy automatic battery stacking machine with many advanced features to ensure stable, repeatable, and precise electrode stacking.

The larger pouch cup forming machine is customized and manually pouch cell case forming machine with Max 600x500 mm pouch die, used for making large pouch cells in battery lab research.

This vacuum secondary sealing machine is used for lithium pouch cell vacuuming and final heat sealing after the filling and electrolyte diffusion process. Hot compression packaging (medium and small size); simple battery final sealer.

This pouch case forming machine is suitable for hot pressing and cold pressing of pouch cell lithium batteries.The hot press machine is mainly used for battery core hot press shaping after winding process, easy for battery core into the pouch or shell.

This vacuum hot sealer machine is used for lithium pouch cell vacuuming and final heat sealing after the filling and electrolyte diffusion process. Hot compression packaging (medium and small size); simple battery final sealer.

The JT-MSK-180SP is a gas-driven electrode die cutter for producing pouch battery cathode/anode electrodes ( no electricity required ).

The JT-MSK-PN120 is a compact gas-driven aluminum laminated films pouch case forming machine for pouch cell fabrication laboratory, which fits the electrodes cut by MSK-180S electrode cutting machine.

The JT-MSK-180SP is a gas-driven electrode die cutter for producing pouch battery cathode/anode electrodes ( no electricity required ).

This ultrasonic metal spot welder with a touch-screen controller and automatic frequency tracking function. It is designed for welding stacked electrode foils/sheets and Ni tabs onto current collectors to prepare Li-ion pouch cells & cylindrical cells in R&D laboratories and production lines.

The vacuum mixing machine is designed for making large batches of the chemical compound via blending and mixing in a single container under vacuum driven by electricity only.

This rolling press machine is specially used for the electric rolling of small lithium electrode sheets, a small number of precious metal materials such as gold and silver, copper and aluminum, and other non-ferrous materials.

This battery electrode slitting machine is a semi-automatic slitting machine (roll slitting) for preparing electrodes of cylinder batteries in R&D laboratories.

The larger lithium battery forming machine is customized and manually pouch cell case forming machine with Max 600x500 mm pouch die, used for making large pouch cells in battery lab research.

This is a semi-automatic electrode slitting machine for cylindrical battery electrode preparation.The battery slitting machine can be applied to the precision slitting process of lithium-ion battery positive and negative plates.

This battery electrode slitting machine is a semi-automatic slitting machine (roll slitting) for preparing electrodes of cylinder batteries in R&D laboratories.

The electric vacuum mixer is designed for making large batches of the chemical compound via blending and mixing in a single container under vacuum driven by electricity only.

The lab vacuum mixing machine comes with a vibration stage, mainly used for mixing battery raw materials in the laboratory. This vacuum mixer is high-efficiency equipment that integrates vacuum mixing.

Lithium Manganese Dioxide is mainly used in the manufacture of mobile phones and notebook computers and other portable electronic devices for lithium-ion battery cathode material.

High Consistency Lithium cobalt oxide LiCoO2 powder LCO is mainly used for lithium battery cathode raw material.

The electrolyte is mainly used for lithium batteries, according to different types of batteries and different use environments, they can be customized.

Hard Carbon Anode Electrode Material for Na-Ion Battery

LTO/ Lithium titanate/Lithium Titanium Oxide/ LiTiO / Li4Ti5O12 (Carbon coating is black powder, no carbon coating is white powder). At present, it is mainly used in energy storage batteries, EV batteries, special power supplies, supercapacitors and so on.

Battery Chemical Material 99% Purity FeC2O4 Powder for Lithium Battery Lab Research

Lithium nickel manganese cobalt oxide NMC111 is mainly used for energy storage/electric tools/light electric vehicles/miner's lamps/mobile power and so on.

Lithium Nickel Cobalt Manganese Oxide NMC622 LiNiMnCoO2 622 powder used for lithium battery cathode raw material.

High nickel-type NMC material has a larger capacity for the battery.The lithium nickel cobalt manganese battery is safer than the lithium cobalt oxide battery. The finished lithium battery is mainly used for compact electric tools or equipment.

This high discharge rate LFP LiFePO4 powder is for cathode materials of lithium-ion batteries. Typical applications of the high-rate cathode material are used in robotics, photo flash, EV, etc.

High Capacity Battery Lithium Nickel Manganese Cobalt Oxide (N:M:C=5:3:2) Powder